Capacitor Grade Metallized Polypropylene Film New Energy

• Usage: for Capacitor Use
• Type: Metallized Film
• Material: BOPP
• Feather: Electrical Film
• Hardness: Soft
• Transparency: Opaque
• Model NO.: Metallized BOPP film
• Processing Type: Vacuum Evaporation
• Thickness: 2.0-12micron
• Width: 4-600mm
• Margin: 0.5-5mm
• Margin Types: Single/Center/Double/Multiple
• Square Resistance: 1-120 Ohm/Sq
• Slitting Types: Straight Cut/Wave Cut
• Outer Diameter of Film Roll: 150-330mm(±20mm)
• Coated Metal: Aluminum Znic Alloy; Aluminum
• Coating Side: Single / Double Sides
• Tensile Strength(MD): 100MPa
• Elongation at Break(MD): 20-200%
• Elastic Modulus: 2800MPa
• Heat Shrinkage(MD): ≤5(120celsius ,10mins)
• Wetting Tension: 38mn/M at Corona Treated Side
• Special Service: Customize
• Transport Package: Vacuum Packing; Carton; Pallet
• Specification: Zinc Aluminum Alloy; Aluminum
• Trademark: Saifu; CSF
• Origin: Tongling City, Anhui, China
• Production Capacity: 200tons/Month

Product Description

Capacitor grade metallized polypropylene film New Energy



Base Film

Base film	BOPP	PET
Normal Thickness	2.0μm ~12.0μm	1.4μm ~12.0μm
Margin type	Single / Double / Customized
Coating metal	Zinc-Aluminum alloy /Aluminum
Coating side	Single / Double sides
Edge structure	Heavy edge
Cutting type	Straight cut / Wave cut

Specification of Metallized film

Properties of MPP Film	Unit	Typical value
Density	g/cm3	0.905±0.005
Thickness	µm	2.0 ~ 12
Tensile Strength	MD (MPa)	≥100
Elongation at Break	MD (%)	20~200
Elastic Modulus	MD (MPa)	2800
Heat Shrinkage	MD (%)	≤5 ( 120°C, 10min)
Wetting Tension	mN/m	38  (Corona treated side)
Surface Roughness	µm	0.08
Melting Point	ºC	172
Volume Resistivity	Ω.m	>1015
Break-dowm Voltage	V/µm	≥350 ( 23°C, DC )
Dielectric Constant		2.2  (20ºC,1KHz)
Dissipation Factor		≤4×10-4 (20ºC,1KHz )
RC	ΩF	≥5×104

 

Properties of MPET Film	Unit	Typical Value
Density	g/cm3	1.4
Thickness	µm	<5	5~12	≥12
Tensile Strength	MD (MPa)	≥84	≥108	≥120
Elongation at Break	MD (%)	≥22	≥33	≥44
Elastic Modulus	MD (MPa)	3500
Break-dowm Voltage	V/µm	≥200 ( 23°C, DC )	≥250 ( 23°C, DC )
Heat Shrinkage	MD (%)	≤2.5 ( 150°C, 10min)
Surface Roughness	µm	0.095
Melting Point	ºC	256
Volume Resistivity	Ω.m	>1015  ( 23°C, Humidity 50%)
Dielectric Constant		3.2  (20ºC,1KHz)
Dissipation Factor	-	≤60×10-4 (20ºC,1KHz )
RC	ΩF	≥1×104

Normal Widths and Margins of Metallized Film Remark:  The Square Resistance, Width and Margin can be customized.


Normal Square Resistance of Metallized Film

Reinforced Area	Active Area
(2~4)Ω	(6~9)Ω
(1~3)Ω	(4~6)Ω
(1~3)Ω	(12~18)Ω
(2~4)Ω	(17~23)Ω

 

Packing of Metallized film

1. Film rolls are packed in plastic bags, vacuumed and put into desiccant for heat sealing.
2. The Bags are marked with type labels, mark thickness width, free margin width and resistance.
3. The bags are packed in carton cases.
4. The cartons are wrapped by wooden cases or reinforced carton.

 

 

Company Profile
Anhui Safe Electronics Co., LTD. was founded in 2007. We specialized in manufacturing metallized film for capacitor use and metallized film capacitors. Our quality management system are certified by ISO9001 and our products have UL, VDE and other performance certifications, compliance with EU RoHS directive, with SGS report. The company has a postdoctoral enterprise workstation with Anhui University of Technology.

Anhui Safe Electronics Co., Ltd. has obtained 
ISO9001 quality management system certificate
ISO14001 environment management system certificate
OHSAS18001 occupational health and safety management system certificate




FAQ
Q1  Are you a manufacturer or a trading company?
A:  We are a manufacturer located in Tongling city, Anhui, 2-3 hours drive to Shanghai and Nanjing. Welcome you to visit our factory.

Q2  Can you provide free samples?
A:  Yes, we can. It is very reasonable that we both invest in the opportunity that we both provide you the free goods sample while you pay for the transportation fee.

Q3 Why shall I choose Anhui Safe company?
A:1) Your thoughts are very important to us. We are always keen to understand your needs, because we know that the best products are always developed in close cooperation with our customers.

   2) With advanced equipments and technology, 6 high vacuum coating machines, 20 slitters, professional R&D team and technicians who have been deeply involved in the capacitor film industry for many years make us have the ability and confidence to serve you well.

   3) We are always committed to doing better for you. With 15 years of industry experience and export experience, we know how to serve you and provide you unparalleled quality products with affordable cost.

Listening, serving, collaboration, we manufacture excellence for you!