9 Micron Zn-Al Alloy Metallized Polypropylene Plastic Capacitor Grade Film

• Usage: Metallized Film for Capacitor Use
• Type: Metallized Film
• Material: BOPP
• Feather: Metallized Polypropylene Film
• Hardness: Soft
• Transparency: Opaque
• Model NO.: Metallized Film For Capacitor Use
• Processing Type: Multiple Extrusion
• Thickness: 1.9-12micron
• Width: 10-150mm
• Inner Diameter: 75mm
• Outder Diameter: 180mm, 200mm,220mm, 240mm,270mm,280mm,300mm, 320mm
• MOQ: 1 Pair
• Application: Film Capacitor
• Margin: 0.5mm, 1mm, 1.5mm,2mm,2.5mm,3mm,5mm
• Customize: Accept Customized Metallized Film
• DC Dielectric Strength: Over 400VDC
• Width Tolerance: 3mm
• Margin Width Deviation: +-0.2mm
• Micrometer (Ten Layers) Thickness: +-2%
• Raw Material Density: 0.905g/mm3
• Delivery Date: 7-15days
• Resistance: 2-4/6-9ohm/Sq
• Transport Package: Standard Export Pallet Packing for Metallised Film
• Specification: Metallised film for capacitor use
• Trademark: CSF, SAIFU
• Origin: China
• HS Code: 3920209090
• Production Capacity: 300tons/Month

Product Description

 Metallised Film Introduction 
            

Base film	PP
Normal thickness	2.0μm ~15.0μm
Margin type	Single, two margins
Coating metal	Zinc-Aluminum alloy,Aluminum
Coating side	Single,two sides
Edge structure	Heavy edge
Cutting type	Straight cut, wave cut

  Square Resistance 
 

Reinforced resistance	Normal resistance
(2~4)Ohm/sq	(6~9)Ohm/sq
(1~3)Ohm/sq	(4~6)Ohm/sq
(1~3)Ohm/sq	(12~18)Ohm/sq
(2~4)Ohm/sq	(17~23)Ohm/sq

 

Inside/outside core diameter
 

Inside core diameter/Tolerance		Outside core diameter/Tolerance
75mm	+1/-0.5mm	220 280 320	±20mm ±20mm ±20mm
A pair tolerance of outside core diameter ≤2mm

Specifications of metallized MPP film

 

Properties	Unit	Typical value
Density	g/cm3	0.905±0.005
Thickness	um	2.2-15
Tensile Strength	MD(MPa)	≥100
Elongation at Break	MD(%)	20~200
Elastic Modulus	MD(MPa)	2800
Heat Shrinkage	MD(%)	≤5 ( 120ºC, 10min)
Wetting Tension	mN/m	38(Corona treated side)
Surface Roughness	µm	0.08
Melting Point	ºC	172
Volume Resistivity	Ω.m	>1015
Break-dowm Voltage	V/µm	≥350(23ºC,DC)
Dielectric Constant		2.2 (20ºC,1KHz)
Dissipation Factor		≤5×10-4 (20ºC,1KHz )
Other specifications of metallised film can be negotiable

 

Metallised film Packing
 

1)Film rolls are packed in plastic bags, vacuumed and put into desiccant for heat sealing.
2)The Bags are marked with type labels, mark thickness width, free margin width and resistance.
3)The bags are packed in carton cases.
4)The cartons are wrapped by wooden cases or reinforced carton.

Metallised film Storage
 

 Metallized film should be stored in its original package with temperature 5 - 35ºC and humidity less than 85%RH before using.
Metallized layer is easily oxidized when exposure to moisture. Therefore, the film should be used as soon as possible when opened.
The recommended temperature is 15 -25ºC with humidity less than 60%RH after opening.
With original sealed package, and stored as mentioned above, the storage time can be as following:
Al metallized film: 12 months from the delivery date. 
Al/Zn Alloy metallized film: As zinc is quite unstable , the storage period (from delivery date) depends on the resistance of the film:
≤10 Ohm/sq: 6 months
10 ~30Ohm/sq: 3 months
>30Ohm/sq: 1month

Appliactions of Metallised film